线性二次型最优控制的并行算法和软件

构造了线性二次型最优控制的并行算法，介绍了这个并行算法在武汉大学“ＷＵＤＰ９１”并行分布式处理系统上试算的数值应用软件的框图．本软件适用于既定动态系统的平衡问题．对于经济系统，可通过政策控制变量来调节和改善其状态和响应．对于自治系统可找出最优控制使得消耗函数达到最小值．通过对一系列例子进行试算，结果证实，所构造的并行算法和相应的数值软件是有效的，其加速比约为７．     

Measurement of small-signal and large-signal responses of packaged laser modules at high temperature

In this paper, the pulsed injection method is extended to measure the chip temperature of various packaged laser modules, such as the DFB laser modules, the FP laser modules, and the EML laser modules. An optimal injection condition is obtained by investigating the dependence of the lasing wavelength on the width and period of the injection pulse in a relatively wide temperature range. The small-signal frequency responses and large-signal performances of packaged laser modules at different chip temperature are measured. The adiabatic small-signal modulation characteristics of packaged LD are first extracted. In the large-signal measurement, the effects of chip temperature, bias current and driving signal on the performances of the laser modules are discussed. It has been found that the large-signal performances of the EML modules depend on the different red-shift speeds of the DFB and EAM sections as chip temperature varying, and the optimal characteristics may be achieved at higher temperature.     

多级轴流压气机全工况特性计算

本文使用三维粘性流动计算软件Fine／Numeca,对某十五级轴流压气机进行了内流流场和全工况特性的数值计算尝试。分析了该压气机在设计工况和非设计工况的性能,同时把整机计算结果和前七级叶片的计算结果进行了比较。计算结果表明,当计算的级数较少时,目前的软件和硬件平台可以比较合理地预测压气机的全工况特性;而当计算的级数较多时,准确的数值模拟仍需要更为准确的多级模型和数值方法。     

Synthesis of poly(p‐phenylene sulfide) from bis(4‐bromophenyl) disulfide

Improved reaction conditions for the preparation of poly(p‐phenylene sulfide) (PPS) directly from bis(4‐bromophenyl) disulfide (BBD) have been established. Heating BBD with magnesium metal afforded only a low molecular weight polymer. PPS with a melting temperature around 280 °C was obtained from BBD in the presence of sodium carbonate or zinc metal. The best results were obtained with the addition of a catalytic amount of KI to the zinc–BBD mixture. Polymers prepared by the above methods are semicrystalline and dissolve in 1‐chloronaphthalene and have properties comparable to commercial PPS. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 900–904, 2006     

Chemically modified proton‐conducting membranes based on sulfonated polyimides: Improved water stability and fuel‐cell performance

A series of branched/crosslinked sulfonated polyimide (B/C‐SPI) membranes were prepared and evaluated as proton‐conducting ionomers based on the new concept of in situ crosslinking from sulfonated polyimide (SPI) oligomers and triamine monomers. Chemical branching and crosslinking in SPI oligomers with 1,3,5‐tris(4‐aminophenoxy)benzene as a crosslinker gave the polymer membranes very good water stability and mechanical properties under an accelerated aging treatment in water at 130 °C, despite their high ion‐exchange capacity (2.2–2.6 mequiv g^?1). The resulting polymer electrolytes displayed high proton conductivities of 0.2–0.3 S cm^?1 at 120 °C in water and reasonably high conductivities of 0.02–0.03 S cm^?1 at 50% relative humidity. In a single H₂/O₂ fuel‐cell system at 90 °C, they exhibited high fuel‐cell performances comparable to those of Nafion 112. The B/C‐SPI membranes also displayed good performances in a direct methanol fuel cell with methanol concentrations as high as 50 wt % that were superior to those of Nafion 112. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3751–3762, 2006     

Lithographic design of photosensitive polyarylates based on reaction development patterning

The factors affecting pattern‐forming properties in reaction development patterning were examined with polyarylates with various bisphenol moieties. The developability of the photosensitive polyarylates was dependent on the properties of the subtituent (R) in the bisphenol moieties. The development time decreased in the following order: R?C(CH₃)₂ > fluorenyl unit ? phenolphthalein unit > C(CF₃)₂ > SO₂. This order agreed with that of the reactivity between the polyarylates and ethanolamine, and these orders can be explained by pK_a of the bisphenol used to prepare the polyarylates. The development with NH₂? R′? OH resulted in successful positive‐tone pattern formation. However, pattern formation with the developers containing NH₂? R′? OCH₃ was unsuccessful. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2694–2706, 2006     

Evaluation of piezoelectric PVDF polymers for use in space environments. III. Comparison of the effects of vacuum UV and gamma radiation

Films of piezoelectric PVDF and P(VDF‐TrFE) were exposed to vacuum UV (115–300 nm VUV) and γ‐radiation to investigate how these two forms of radiation affect the chemical, morphological, and piezoelectric properties of the polymers. The extent of crosslinking was almost identical in both polymers after γ‐irradiation, but surprisingly, was significantly higher for the TrFE copolymer after VUV‐irradiation. Changes in the melting behavior were also more significant in the TrFE copolymer after VUV‐irradiation due to both surface and bulk crosslinking, compared with only surface crosslinking for the PVDF films. The piezoelectric properties (measured using d₃₃ piezoelectric coefficients and D‐E hysteresis loops) were unchanged in the PVDF homopolymer, while the TrFE copolymer exhibited more narrow D‐E loops after exposure to either γ‐ or VUV‐radiation. The more severe damage to the TrFE copolymer in comparison with the PVDF homopolymer after VUV‐irradiation is explained by different energy deposition characteristics. The short wavelength, highly energetic photons are undoubtedly absorbed in the surface layers of both polymers, and we propose that while the longer wavelength components of the VUV‐radiation are absorbed by the bulk of the TrFE copolymer causing crosslinking, they are transmitted harmlessly in the PVDF homopolymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3253–3264, 2006     

叶片扩压器进口安装角对离心压缩机性能影响的数值与实验研究

对不同扩压器进口安装角下离心压缩机的性能进行了实验研究,并详细计算分析了相应的流场分布。分析表明, 不同的进口安装角对压缩机的流动有较大的影响,压缩机的性能曲线也有不同程度的左右偏移;进口处较大的正冲角和负冲角均会在扩压器叶片表面出现大尺度的分离涡团;在给定的流量工况下,应存在一个最佳的进口安装角,使得扩压器效率最高;设计工况下,最高效率所对应的冲角并非为零。     

Sample-path optimization of convex stochastic performance functions

In this paper we propose a method for optimizing convex performance functions in stochastic systems. These functions can include expected performance in static systems and steady-state performance in discrete-event dynamic systems; they may be nonsmooth. The method is closely related to retrospective simulation optimization; it appears to overcome some limitations of stochastic approximation, which is often applied to such problems. We explain the method and give computational results for two classes of problems: tandem production lines with up to 50 machines, and stochastic PERT (Program Evaluation and Review Technique) problems with up to 70 nodes and 110 arcs. Sponsored by the National Science Foundation under grant number CCR-9109345, by the Air Force Systems Command, USAF, under grant numbers F49620-93-1-0068 and F49620-95-1-0222, by the U.S. Army Research Office under grant number DAAL03-92-G-0408, and by the U.S. Army Space and Strategic Defense Command under contract number DASG60-91-C-0144. The U.S. Government has certain rights in this material, and is authorized to reproduce and distribute reprints for Governmental purposes notwithstanding any copyright notation thereon. Sponsored by a Wisconsin/Hilldale Research Award, by the U.S. Army Space and Strategic Defense Command under contract number DASG60-91-C-0144, and the Air Force Systems Command, USAF, under grant number F49620-93-1-0068. Sponsored by the National Science Foundation under grant number DDM-9201813.     

高效液相色谱法测定花生中黄曲霉毒素

本文报导了用高效液相色谱－荧光检测法测定了花生中黄曲霉毒素的方法，并做了回收验证。实验证明本法具有灵敏度高，分离能力强，测试结果准确可靠，色谱条件，ＲＰ１８柱，甲醇四氢呋喃水溶液作流动相，流速１ｍＬ／ｍｉｎ。